Instruction manual

Displayed
when clip is
paused.
- 59 -- 58 -
VIEWING PICTURES
MOVIE PLAYBACK
To view movie clips, make sure the camera has been turned off. Turn on the
LCD monitor by pressing the display/enter button (1), and set the function dial
to the movie playback position (2).
The LCD monitor displays the first frame of each clip. Press the scroll buttons
(3) to select a clip. The counter indicates the clip number displayed and the
total number of clips on the CompactFlash card.
5
4
Pressing the shutter release button (4) will start the displayed movie clip. To
pause the clip, press the shutter-release button during playback; pressing the
shutter-release button again restarts the playback of the clip. When finished,
the first frame of the clip will be displayed on the LCD monitor. To cancel the
playback of a movie clip, press one of the scroll buttons (5); the first frame of
the previous or next clip will be displayed.
1
3
2
Clip number /
total number of clips
MOVIE
2 / 3
LCD Monitor Display (Before playback)
PAUSE
LCD Monitor Display (During playback)
Downloaded From camera-usermanual.com