Instruction manual

- 55 -- 54 -
TURNING OFF THE CAMERA IN PLAYBACK MODE
Press the display/enter button to
turn off the LCD monitor; all the
camera’s functions are shut down.
VIEWING PICTURES
In single-frame playback mode,
press the digital-zoom button.
• The enlargement magnification of X1.0 will
appear in the upper-right corner of the LCD
monitor.
Press the scroll ( ) buttons to
select the desired magnification
setting.
• The change in magnification is instantly
visible on the LCD monitor.
• Pressing the digital-zoom button again will
reset the playback magnification to X1.0 and
exit the enlarged-playback mode.
ENLARGED PLAYBACK
FULL
X1.0
Digital zoom magnification selected when the image was taken
X1.4 X2.0
HALF
X1.0/X2.0/X3.0 X1.0/X2.0/X3.0 X1.0/X2.0
X1.0/X2.0 Cannot enlarge Cannot enlarge
Image size of the
recorded image
The enlarged-playback mode is limited by the image size and the digital-zoom mag-
nification selected when the image was taken. For example, a full-sized image cap-
tured with X2.0 digital zoom magnification can not be magnified to X3.0 in enlarged-
playback mode.
In enlarged playback, the image can be magnified on the LCD monitor by up to three
times the display size. The enlarged-playback magnification will reset to X1.0 when
the camera is turned off.
PLAYBACK
X 1.0
10/27
PLAYBACK
X 3.0
10/27
PLAYBACK
X 2.0
10/27
X1.0 X2.0 X3.0
ENLARGED-PLAYBACK MAGNIFICATION
Downloaded From camera-usermanual.com