Instruction manual

- 43 -- 42 -
TAKING PICTURES
The IR Remote Control RC-3 allows remote camera operation up to 5m (16 ft.) away.
IR REMOTE CONTROL (SOLD SEPARATELY)
Place the camera on a tripod, and
turn the function dial to to set
the self-timer / remote control
mode.
Arrange the camera and subject to
compose the picture. Frame the
subject within the focus frame when
setting up the camera.
• Focus lock cannot be used with the IR remote
control.
Emitter window
Delay button
Release button
While pointing the emitter window
of the remote control unit toward
the camera, press the release
button or the delay button to take
the picture.
• When the release button is pressed, the lamp
on the front of the camera will blink once
before the picture is taken.
• When the delay button is pressed, the lamp
on the front of the camera will blink for two
seconds before the picture is taken.
• The remote control may not operate with
backlit subjects or under fluorescent light.
RECORDING-MODE MENU
Controlling the Image
• Navigating the Recording-mode Menu
• Image Quality
• Image Size
• Image-file Size
• White Balance
• Sharpness
• Camera Sensitivity (ISO)
• CompactFlash Card Capacity
The recording-mode menu can only be used for still-image recording.
Downloaded From camera-usermanual.com