Instruction manual

SINGLE X 1.0
27
- 37 -- 36 -
TAKING PICTURES TAKING PICTURES
In a still-image recording mode,
press the digital-zoom button.
• The zoom magnification appears in the
upper-right corner of the LCD monitor.
• The digital-zoom feature cannot be used with
half-size images (p. 47).
• When the digital-zoom button is pressed, the
LCD monitor automatically activates if off.
Press the scroll ( ) buttons to
change the magnification on the
LCD monitor.
• As the scroll-up button is pressed, the zoom
magnification will increase in the following
order: X1.0, X1.4, X2.0.
• After the picture is taken, the digital-zoom
setting will remain in effect until the digital-
zoom button is pressed again or the camera
is turned off.
The digital zoom can magnify the picture up to twice the size of a normal image. The
increase in magnification can be viewed on the LCD monitor; the viewfinder will not
display the change in magnification. Always use the LCD monitor to compose your
picture. The digital zoom cannot be used in the movie mode.
Magnification Image Size (hor. X vert.)
X 1.4 1280 X 856 pixels
X 2.0 896 X 600 pixels
• Images recorded with the digital zoom are trimmed horizontally and vertically and
are not interpolated to 1792 x 1200 pixels.
As a result, as the zoom magnification
increases, the file size of the image decreases and the data panel frame counter
adjusts accordingly. However, when displayed on the LCD monitor, the images will
be enlarged to fit the screen.
DIGITAL ZOOM
SINGLE X 1.4
27
SINGLE
0.0
X 2.0
27
FUNCTION DIAL AND RECORDING MODES
LCD Monitor
Display
Function Dial Recording Mode
SINGLE
Single-frame
Advance
CONT.
Continuous
Advance
MOVIE
Movie
Recording
TIMER
Self-timer /
Remote Control
To take single images
(see basic recording operation
p. 27).
To take multiple images at
one time (p. 38).
To record moving images of
up to 60 seconds (p. 39).
To take self-portraits (p. 41)
and to take pictures using the
optional IR remote control
(p. 42).
Downloaded From camera-usermanual.com