Operation Manual

151
AUTO POWER SAVE (DATA-TRANSFER MODE)
If the camera does not receive a read or write command within ten minutes, it will shut
down to save power. When the camera shuts down, an unsafe-removal-of-device
warning may appear on the computer monitor. Click “OK.” Neither the camera or
computer will be damaged in this operation.
Unplug the USB cable and turn off the camera. Remake the USB connection by
reattaching the cable and turning the camera on.
QUICKTIME SYSTEM REQUIREMENTS
To install QuickTime, follow the
instructions in the installer. Macintosh
users can download the latest version
of QuickTime free of charge from the
Apple Computer web site at
http://www.apple.com.
IBM PC / AT compatible
Pentium-based computer
Windows 95, 98, 98SE, NT, Me,
2000 Professional, or XP.
32MB or more of RAM
Sound Blaster or compatible sound card
DirectX 3.0 or later recommended