Operation Manual

134
S
ETUP MENU
Hold down the function button (1) and press the
menu button (2) to open the setup menu.
LCDbrightness –
Shortcut help –
Transfer mode Data storage
EVF auto swtch Auto EVF/LCD
Video output NTSC
Language English
1
2
1
2
Hold down the function button (1) and press the
QV/delete button (2) to reset the camera. This shortcut
only resets the recording mode or movie mode
depending on the position of the mode switch. Refer to
page 95 to see which functions reset in the recording
mode, and page 113 for the movie mode.
TRANSFER MODE
The data-transfer mode specifies whether the camera will act as a mass storage device
or a remote camera when connected to a computer. To download images from the
memory card to the computer, the data storage option should be selected. To capture
images from a computer with a Windows operating system using the DiMAGE Capture
software, the computer-control option should be selected.
DiMAGE Capture software is sold separately. See your local Minolta dealer for
information on this product.