Instruction Manual

SPECIFYING THE PRINT SETTINGS WITH THE DPOF - CONT’D
- 97 -
After confirming that [STD.] is
highlighted, press the ENTER
button.
• The display to specify the number to be
printed appears on the LCD monitor.
0
0
0
0
0
0
: QUANTITY
: CHANGE IMAGE
ENTER TO SET
Press or key to select the
image to be printed.
• When the image to be printed is selected,
the number to be printed is highlighted.
• When the sixth frame is selected (when
the number to be printed is highlighted)
and the key is pressed, the following 6
frames are displayed.
• When the seventh frame is selected (when
the number to be printed is highlighted)
and the key is pressed, the preceding 6
frames are displayed.
Continued on Next Page
D2330Z_Body_Eng.qxd.4 00.10.11 5:23 PM ページ 97