Instruction Manual

BASIC RECORDING PROCEDURE
- 32 -
Rotate the function dial to .
Slide the power switch to turn on
the camera.
• The power switch returns to the initial
position.
Determine the image composition
while looking into either LCD
monitor or viewfinder.
• When holding the camera, be sure not to
cover the lens with your fingers and so on.
• When the focus is not adjusted on the
subject, use the focus lock function (see
page 38).
Adjust the image range and size
with the / keys.
• When the key is pressed, the image
size becomes large (Telephoto mode).
When the key is pressed, the image
range becomes wide (Wide-angle mode).
D2330Z_Body_Eng.qxd.4 00.10.11 5:22 PM ページ 32