Instruction Manual

WATCHING THE CAPTURED IMAGES ON TV
- 147 -
By connecting this camera to your TV with the supplied video cable, you can
watch the captured images on TV.
Confirm that the video out signal from the video-out
terminal is set to NTSC or PAL according to the color
system in your country. (see page 122).
Turn off the power of the this camera and TV.
Open the terminal cover on the left side of the camera and
connect the mini plug of the supplied video cable to the
video-out terminal of the camera.
• The LCD monitor is turned off.
Connect the other side of the video cable to the video input
terminal on TV.
Turn on the power of TV.
Rotate the function dial to .
Slide the power switch to turn on the camera.
Switch the video input of TV according to the terminal to
which the video cable is connected.
• The images recorded in the CF card can be displayed both on the LCD
monitor and TV.
You can watch the images in the various play modes
performing the procedure described on pages from 71 to 78.
• The images can be played back in the slide show mode (see page 79), etc.
D2330Z_Body_Eng.qxd.4 00.10.11 5:23 PM ページ 147