Instruction Manual

ManualsBrandsMINOLTA ManualsCamerasMINOLTA Dimage 2330 Zoom

111

112

113

114

115

116

117

118

119

120

- 119 -

SETTING THE DATE AND TIME - CONT’D

STYLE YYYY/MM/DD

DATE 2000/09/30

TIME 17:33

: SELECT

: ADJUST

ENTER: SET

Press the or key to

specify or correct the date

and time.

When you press and hold the

or key, the value goes

fastforward or fastbackward.

• The value for year can be specified

from 2000 to 2099.

• When other values need to be

changed, repeat step and .

• If [TIME] is highlighted and the

ENTER button is pressed on step 3,

the display to specify the date and

time appears as shown in the figure.

To correct the time, repeat step

and .

After the date and time is

specified (corrected), press

the ENTER button.

• The built-in clock of this camera

starts functioning. The LCD monitor

returns to the setup mode menu.

* After replacing the batteries, check that the built-in clock (date and time)

functions correctly.

If the AC adapter is not used and the battery-chamber door is open for more

than 5 minutes, the built-in clock may delay or be reset to the default setting. In

this case, set the date and time again.