Instruction Manual

SETTING THE DATE AND TIME
- 116 -
When taking a picture, the date and time are recorded as the part of the image
information. If the built -in clock of this camera is not set correctly, the wrong date
and time are recorded. Set the date and time correctly by performing the
procedure below.
Rotate the function dial to
and slide the power switch to
turn on the camera.
• The power switch returns to the
initial position.
Rotate the function dial to
“SETUP”.
• The setup mode menu is displayed
on the LCD monitor as shown in the
figure.
LCD BRIGHT 7
POWER SAVE 10 MIN.
FORMAT
DATE 2000/08/30
TIME 17:33
BEEP ON
VIDEO OUT NTSC
LANGUAGE ENGLISH
DEFAULT
D2330Z_Body_Eng.qxd.4 00.10.11 5:23 PM ページ 116