Instruction Manual

SPECIFYING THE TIME FOR THE AUTO POWER OFF FUNCTION
- 112 -
To save the battery power, this camera will be turned off automatically if it is not
operated more than 3 minutes. (Auto Power Off function) The time for the auto
power off function is set to 3 minutes unless you change the setting after you
purchase this camera.
Rotate the function dial to
and slide the power switch to
turn on the camera.
• The power switch returns to the
initial position.
Rotate the function dial to
“SETUP”.
• The setup mode menu is displayed
on the LCD monitor as shown in the
figure.
Press the or key so
that [POWER SAVE] is
highlighted and press the
key.
LCD BRIGHT 7
POWER SAVE 3 MIN.
FORMAT
DATE 2000/08/30
TIME 17:33
BEEP ON
VIDEO OUT NTSC
LANGUAGE ENGLISH
DEFAULT
D2330Z_Body_Eng.qxd.4 00.10.11 5:23 PM ページ 112