Service manual

TRAY 3 PAPER FEED UNIT
2-K-1
2 UNIT EXPLANATION
TRAY 3 PAPER FEED UNIT
[1] Composition
[2] Mechanisms
*1 Paper lift-up
a) Hoisting of up/down plate
The up/down plate is lifted up by up/down wires. When the paper tray is loaded, the up drive motor 3 (M21)
rotates to wind the up/down wires around the drive pulleys and consequently the plate moves up. When
the tray upper limit PS3 (PS22) detects the actuator of the plate that has moved up, the up drive motor
3 (M21) stops.
Mechanism Method
*1 Paper lift-up Up: Paper up/down plate driven by up/down wires
Down: Falls down by its own weight
Tray loading Front loading
Double feed prevention Torque limiter
*2 1st paper feed Paper feed roller
Pick up solenoid 3 (SD10)
No paper detection Photosensor + Actuator
*3 Paper size detection
(Universal)
Width: VR
Length: Photosensor + Actuators (two)
Paper feed roller
Side guide
Trailing edge stopper
Paper size detection
PS1-3 (PS38), 2-3 (PS39)
Paper size
detection VR3
Wire B
Wire A
Up drive motor 3 (M21)
Front cover
Drive pulley
Double feed prevention roller
Feed roller
Di850g.book1ページ２００２年７月１２日 金曜日 午前８時３６分