Service manual

D-43
11. Remove the PC Drum Paper Fingers and AIDC Sensor Board as shown below.
NOTES
• At removal and reinstallation, use care not to damage the tip of the fingers.
Also, use care not to get hurt by the tip of the fingers.
• After reinstallation, perform the following adjustment procedure: Positioning of the PC
Drum Paper Separator Fingers.
☞ D-76
NOTE
When reinstalling the PC Drum Paper Separator Fin-
ger Holder Assy., fit the collar of the assy onto the cou
-
pling holder in the rear.
1134D047AA
Coupling Holder
Collar
Assy
AIDC Sensor Board
4002D128AB
PC Drum Paper Separator Finger Installed
1156D063AA
Top View Rear View
Hook the spring property.
After installation, check that the
Paper Separator Fingers operate
smoothly.