Service manual

D-27
(12) Cleaning of the Lower Synchronizing Roller
(13) Removal of the Synchronizing Paper Dust Remover
(14) Removal of the Transport Paper Dust Remover
1. Swing down the Transport Section Release Lever.
2. Using a brush or a vacuum cleaner, clean the
Lower Synchronizing Roller.
4002D081AB
1. Swing down the Front Door and slide out the
Developing Unit.
2. Remove one screw and the Synchronizing Paper
Dust Remover Assy.
4002D082AB
NOTE
When only the Paper Dust Remover is to be replaced,
affix the new one along the reference line as shown on
the left.
1136D094AA
1. Open the Upper Right Door.
2. Remove the Transport Paper Dust Remover Assy.
4002D263AA