Service manual

T- 1 3
Copier Paper Take-Up Misfeed Troubleshooting Procedures
• Paper is not taken up at all.
Step Check Result Action
1 Paper meets product specifications. NO Change paper.
2 Paper is curled, wavy, or damp. YES Change paper.
Instruct user in correct
paper storage.
3 Edge Guide and Trailing Edge Stop are at cor-
rect position to accommodate paper.
NO Set.
4 Paper Take-Up Roll is dirty with paper dust,
deformed, or worn.
YES Clean or change.
5 Paper Lifting Plate is dirty or deformed. YES Clean or change.
6 Paper Separator Pad is dirty with paper dust,
deformed, or worn.
YES Clean or change.
7 Paper take-up guide plate is dirty or deformed. YES Clean or change.
8
1
st
Drawer Paper Take-Up Motor turns when
the Start key is pressed with the 1
st
Drawer
selected.
NO Correct drive coupling.
Change motor or Master
Board.
9
2
nd
Drawer Paper Take-Up Motor turns when
the Start key is pressed with the 2
nd
Drawer
selected.
NO Correct drive coupling.
Change motor or Master
Board.