Service manual

S-15

(2) Administrator Mode

• The entry of the “Administrator #” set using the Tech. Rep. mode permits the settings of

the following functions.

1. Administrator Mode Function Setting Procedure

1. Press the Utility key.

2. Touch the “Administrator Mode” key.

3. Enter the Administrator number.

4. Select the appropriate function.

5. After the settings are complete, touch the “Enter” key to validate the settings.

• Press the Panel Reset key.

2. Settings in the Administrator Mode

Touch Panel

Display

Setting (The default is ).

Copy Track Select the number of accounts to be controlled.

NOTE:

• Printer is displayed when an external I/F is connected.

Copy Track Select whether or not to initialize the copy track data so far taken.

Copy Track Data Select the particular account number.

When “All Counter Reset” is touched, it clears all data under control.

Highlighted

-Copy Track-

ON ON

OFF OFF

-Copy Track method-

100 Accounts

1000 Accounts

Yes (initialize) No (do not initialize)