Service manual

S-14
Touch Panel
Display
Setting (The default is ).
Auto Shut-Off
Mode
✽ When a Printer
Controller is not
connected.
Select the time it takes the Auto Shut Off function, which shuts down
the copier when the set period of time elapses after a copy cycle has
been completed or the last key operated, to be activated.
NOTE:
• The option of “OFF” becomes available on the screen if “Yes” is
selected for “Disable Auto Shut off” of the “Administrator Mode”
function.
Date/Time Set Set the date and time-of-day for Date Printing.
Print Exposure Set the image density level for printing.
Priority Device Select the priority configuration of the copier established when the
Power Switch is turned ON or the Panel Reset key pressed.
Density (ADF) Adjust the copy image density level when the ADF is being used.
Priority Offset Tray Select the particular Offset Tray to which priority is given.
Highlighted
OFF
15 to 90 ( )
90 min.
Year 1999 to 2089 Month 1 to 12
Day 1 to 31 Time
00 to 23 (hour)
00 to 59 (min)
Lighter Darker
Normal
Printer
Copier
Mode 1 When the standard original (text, etc.) is used.
To give better reproduction of faint original.
Mode 2
Bottom Tray
Top Tray