Service manual

S-13
Touch Panel
Display
Setting (The default is ).
Universal Tray Set the paper size for the Universal Tray.
Special Paper Define the type of paper used for each paper source, or designate a
particular paper source for special paper.
Auto Panel Reset Select the time it takes the Auto Panel Reset function, which resets
the panel settings when the set period of time elapses after a copy
cycle has been completed or the last key operated, to be activated.
Energy Saver
Mode
Select the time it takes the copier to enter the Energy Saver mode
after a copy cycle has been completed or the last key operated.
Use the 10-Key Pad to set the time.
Plug-In Counter
Reset
Select whether or not to activate the Panel Reset function when the
Plug-In Counter or a magnetic card is pulled out.
Sleep
✽ When a Printer
Controller is
connected.
Select the time it takes the Sleep function, which shuts down the
copier when the set period of time elapses after a copy cycle has
been completed or the last key operated, to be activated.
NOTE:
• The option of “OFF” becomes available on the screen if “Yes” is
selected for “Disable Sleep” of the “Administrator Mode” function.
Highlighted
Size Input
Auto Detect
Cover/Insert
Recycled Cover
Not for 2-Sided Insert
Normal
30 sec. 2 min.
3 min. 5 min. No Reset
1min.
1to90( )
15 min.
OFF
ON
OFF
15 to 90 ( )
90 min.