Service manual

S-12
Touch Panel
Display
Setting (The default is ).
“Smaller” Originals Select whether to enable or disable a copy cycle when it is initiated
with an original of a small size that is not detectable by the system
placed on the Original Glass.
✽ Default: Metric areas OFF/Inch Areas ON.
4in1 Copy Order Specify the default copying order in the 4in1 mode.
Date Printing
Format
Select the delimiter and format for date printing.
Date Printing
Position
Select the position at which to print the date.
Page Number
Position
Set the position at which to print the page number, how many millime-
ters or inches from the bottom of the page.
Confirmation Beep Select whether to enable or disable the beep that sounds each time a
key on the control panel is pressed or a function on the Touch Panel
touched.
Highlighted
ON OFF
21
34
31
24
<Punctuation>
<Year>
<Date Format>
XX.XX.XX
yyyy
DEC/24/’00 24/DEC/’00
12/24/’00 24/12/’00
XX/XX/XX
’yy
’00/12/24
<Metric Areas> <Inch Areas>
X
4to40( )
X
3/16 to 1-9/16” ( )
Y
4to40( )
Y
3/16 to 1-9/16” ( )
8mm
1/4”
20 mm 3/4”
<Metric Areas> <Inch Areas>
4to40( )
3/16 to 1-9/16” ( )
8mm
1/4”
OFF
ON