Service manual

S-2
1. HDD Lamp
Lights up to indicate that the Hard Disk
Drive Kit (option) is being accessed.
2. Access Key
Press to enter the access number when
Copy Track of the Administrator mode
available.
Press the access Key.
3. Energy Saver Key
Press to set machine into the Energy
Saver mode.
4. Interrupt Key
Press to select the Interrupt mode.
5. Panel Reset Key
Press to set the machine into the initial
mode, clearing all settings made on the
control panel.
6. Clear Key
Clear the various numeric values.
7. Stop Key
Stop a print cycle.
Stop a scanning cycle.
8. Start Key
Start a print cycle.
9. Touch Panel
Shows various screens and message.
10. Mode Check Key
Press to show the Mode Check screen.
11. Original Key
Press to select the Mixed Orig. Detec-
tion and other document-related func-
tions setting screen.
12. Job List Key
Press to check for the settings made for
a job (Mode Check), modify the settings
of a job (Change), delete a job (Delete),
and unlock a job (Unlock).
13. Ready Key
Lights up to indicate that data can be
transferred.
14. On Line Key
Press to select either Online or Offline
mode.
15. Display Contrast Knob
Use to adjust the brightness of the
Touch Panel.
16. Utility Key
Press to show the Utility Mode menu.
17. Job Recall Key
Press to show the Job Recall screen on
which you can check or recall a copy-
job program previously stored in mem-
ory.
18. 10-Key pad
The number of copies to be made.
The various numeric values.
19. Scan Key
Press to select the Scanner mode.
20. Copy Key
Press to select the Copy mode.