Operator`s manual

3-41
6. Selecting the Original Copy Type
Making Copies
Chapter 3
Select the particular erase function from
among the three options available.
Hold down [
▼
]or[
▲
] until the desired erase
width is reached. Then, touch [Enter].
NOTES
• You can change the frame erase width in 1/16
increments within the range 1/4 to 3/4.
• The center erase width has been set to 1/2.
Touch [Enter].
Touch [Single-Sided] or [Double-Sided]
under Copy.
NOTE
When Book is used to make copies from, none of
2in1, 4in1, and Booklet is valid.
<To copy using Separation and 2-sided>
• Touch [Page arrange.].
You have a choice of the following two
arrangement types.
• Select the desired page arrangement.
• Touch [Enter].
6
4003P360EA
7
4003P361EA
8
9
4003P056CA
4003P065CA
4002O031AC
•BookOrder
4002O030AB
•Standard
4003P066CB
▼
Downloaded From ManualsPrinter.com Manuals