Operator`s manual

3-30

5. Selecting the Finishing

Making Copies

Chapter 3

<Z-Fold>

Z-Fold folds the copy into three parts with the

copy surface inside as shown below.

Sizes of paper that can be loaded: 11×17L

* The finished copy size has a length half that of

the paper loaded in the machine.

This feature comes in handy when you combine it

with Staple and Hole Punch for filing.

Number of sheets:

Z-Fold only: 2 to 10

Z-Folded 5 sheets + unfolded 25 sheets

NOTES

• When Z-Fold is selected, Auto Paper is automatically set.

• Z-Fold cannot be used if you make a copy from an original placed directly on the Original Glass.

• Even if control panel settings are made to make 2-sided copies from 1-sided originals, the copies to be

Z-Folded will be 1-sided.

• If control panel settings are made to make 2-sided copies from 2-sided originals, the copies to be Z-

Folded will be 2-sided.

• Whenever Z-Fold is set, the machine runs in the Mixed Original Detection mode.

• Even if Staple is previously set to a center position, the setting of Z-Fold automatically cancels this

setting and reselects a side stapling position.

Touch the desired finishing function key and

then touch [Folding].

Touch [Z-Fold].

Touch [LTR] of Output Size.

To set Staple, touch [Corner Staple] or [2-

Point Staple].

1155O043AA

Orig.

Copy

ex.)11

→

Letter

1155O642EA

4003P039CA

4003P045CA

4003P346EA

4003P347EA

Downloaded From ManualsPrinter.com Manuals