Operator`s manual

3-25
5. Selecting the Finishing
Making Copies
Chapter 3
Touch [Select Position].
NOTE
The stapling position cannot be specified if
Corner Staple is selected. It can, however, be
specified if Corner Staple is combined with Hole
Punch.
Touch the desired stapling position on the
Touch Panel.
Touch [Enter].
NOTES
• Stapling is not possible in the Interrupt mode.
• Note the correct direction of the originals when
making copies in the Sort Staple mode.
☞
p.3-32
• Note the position at which the copy set or stack
is stapled together in the Staple mode.
☞
p. 4-22
• If an original is placed directly on the Original
Glass in a Staple mode, Separate Scan is
automatically set.
☞
p.3-67
<Only when the Finisher FN-106/Mailbin Finisher
is mounted>
Touch the desired finishing function key.
Touch [Corner Staple].
NOTES
• When [Corner Staple] is touched with Non-Sort
selected, the Finisher is automatically set into
the Sort mode.
• Stapling is not possible in the Interrupt mode.
• Stapling position cannot be specified if the
machine is equipped with a Finisher FN-106 or
Mailbin Finisher. When the Mailbin Finisher is
mounted, however, you can select the stapling
position only if Hole Punch is combined with
Staple.
• Note the correct direction of the originals when
making copies in the Sort Staple mode.
☞
p.3-32
• If an original is placed directly on the Original
Glass in a Staple mode, Separate Scan is
automatically set.
☞
p.3-67
Useful Tip
Paper size : 11
×
17L to Letter
Number of sheets to be stapled :
Mailbin Finisher: 2 to 50
Finisher FN-106: 2 to 30
3
4003P335EA
4
4003P036CA
5
1
4003P037CA
2
4003P038CA
Downloaded From ManualsPrinter.com Manuals