Operator`s manual

3-24
5. Selecting the Finishing
Making Copies
Chapter 3
[Select Position] key:
Use this key when you want to place your original
in a direction other than the standard or make
punch holes in positions other than those made
automatically.
Touch [Select Position].
Touch the desired hole-punching position.
Touch [Enter].
<Only when the Finisher FN-5/Finisher FN-105 is
mounted>
Touch the desired finishing function key.
Touch the stapling key of your choice.
You have a choice of the following two stapling
types.
* When you touch a stapling key in the Non-
Sort mode, the finisher is automatically set
into the Sort mode.
1
4003P332EA
2
4003P333EA
3
Staple
1
4003P330EA
2
4003P334EA
• Corner Staple
A
Paper size : 11×17L to Letter
Number of sheets : 2 to 50
4002O067AA
•2-PointStaple
<Side Staple>
Paper size : 11×17L to Letter
Number of sheets : 2 to 50
4002O068AA
A
<Center Staple>
(Only when the Finisher FN-5 is mounted)
Paper size : 11×17L, LetterL (For United
States and Canada Users)
:11×17L to LetterL (Except
United States and Canada Users)
Number of sheets : 2 to 15
4002O069AA
AB
Downloaded From ManualsPrinter.com Manuals