Operator`s manual

3-6
2. Placing the Original
Making Copies
Chapter 3
Using the Original Glass
Different methods are used to place the original depending on its type. Use the procedure appropriate for
your original. If you are using an Electronic Document Handler,
☞
p. 3-4
• If you place your original directly on the Original Glass, make sure that it is placed in the direction
illustrated below.
• If you need to place your original in a direction different from these examples, set “Original Direction”
(the direction of the original) on the Touch Panel.
☞
p.3-38
<Using plain paper or originals not suitable for the
Electronic Document Handler>
Raise the Original Cover.
Place the original face down on the Original
Glass.
Position the original in the left rear corner
with the marker on the scale.
Gently lower the Original Cover.
<Using transparencies and translucent paper for
the original>
Place the original in the same way as the
sheet originals.
Place a blank sheet of paper of the same size
over the original.
Gently lower the Original Cover.
4002O124AC
4002O125AC
Sheet Originals
1
2
4002O123AC
3
4002O133AB
Original Scale
4
Highly Transparent Originals
1
2
4002O126AC
Blank
Sheet of
Paper
3
Downloaded From ManualsPrinter.com Manuals