Operator`s manual

3-2
Making Copies
Chapter 3
1. Using Basic Copying Functions
Basic Copying Procedures
One of the most basic copying jobs is to make full-size (×1.000) copies of the original.
Place the original in position (step 2), set the number of copies to be made (step 9), and press the start key
(step 10). This will allow you to make full-size copies on paper of the same size as the original.
[*In the initial mode, Auto Paper, Full Size, and Auto Exposure are automatically selected.]
The selections you make on the Touch Panel will change the exposure level, zoom ratio, the type
of copy and so on.
1. Press the copy key.
4002O281CA
2. Placing the Original
Load the originals face up in the
Electronic Document Handler.
☞ p.3-4
Raise the Original Cover and place the original
face down on the Original Glass. ☞ p.3-6
4002O122AC 4002O123AC
3. Touch [Paper].
☞ p.3-9
4. Touch [Zoom].
☞ p.3-14
5. Touch [Finishing].
☞ p.3-20
• Changing the paper size
4003P001CA
4003P002CA
Selecting the Original Copy Type
▼
• Changing the zoom ratio
• Sorting copies
• Stapling copies
• Punching holes in copies
Selecting the basic functions
• Making copies from a book
• Saving paper to make copies
6. Touch [Orig. Copy].
☞ p.3-36
▼
Downloaded From ManualsPrinter.com Manuals