Operator`s manual

2-15
4. Control Panel Keys and Indicators
Getting to Know Your Machine
Chapter 2
Job List Key
• Press to check for the settings made for a job
(Mode Check), modify the settings of a job
(Change), delete a job (Delete), and unlock a job
(Unlock). ☞ p. 3-70
• Press to check for the memory space still
available for use.
• When the lamp is lit up, it indicates that a job has
been reserved.
Ready Lamp
• Lights up to indicate that data can be transferred.
• Indicates whether the machine is connected to an
external controller.
Blinking: Data is being transferred.
On Line Key
• Press to select either Online or Offline mode.
• Lights up to indicate that the machine is in
Online mode.
Display Contrast Knob
• Use to adjust the brightness of the Touch Panel.
Utility Key
• Press to show the Utility Mode menu.
See : Using the Utility Mode ☞ p. 5-1
Job Recall Key
• Press to show the Job Recall screen on which
you can check or recall a copy-job program
previously stored in memory.
* This key is not valid while the machine is in
the Interrupt mode.
See : Calling up a Job ☞ p. 5-5
Mode Check Key
• Press to show the Mode Check screen. From this
screen you can access the setting screen of a
particular function and change or cancel the
setting as necessary.
• When the lamp is lit up, it indicates that the
copying function currently valid is not the
default setting.
See : Mode Check ☞ p. 2-20
Original Key
• Press to select the Mixed Orig. Detection and
other document-related functions setting screen.
12
87432
1
4002O279EA
5 96
10
11
13
14
15
16
17
• Job/Image/Scan Input • Meter Count
• User’s Choice • Administrator Mode
• Toner Replenisher
Utility Mode
18
19
20
• Mixed Orig. Detection • Separate Scan
Original
Downloaded From ManualsPrinter.com Manuals