Operator`s manual

2-13
3. Machine Parts and Accessories
Getting to Know Your Machine
Chapter 2
Finisher FN-105/Finisher FN-106
Front Door : Open to clear misfed paper.
Bottom Offset Tray : Receives sorted paper by shifting.
Top Offset Tray : Receives plain paper or thick paper.
Grip : Hold to slide the Finisher away from the machine to clear a misfeed or
perform other service job.
19
20
21
22
Finisher FN-5
Front Door : Open to replace the Staple Cartridge or clear misfed paper.
Bottom Offset Tray : Receives sorted/stapled copy sets or grouped copy stacks.
Staple Tray Cover : Open to load documents for manual stapling or to clear a paper misfeed.
Top Offset Tray : Receives plain paper or thick paper.
Grip : Hold to slide the Finisher away from the machine to clear a misfeed or
perform other service job.
23
24
25
26
27
Mailbin Finisher FN-503
Mailbins : Receive outputs fed out in the finishing mode.
Bottom Offset Tray : Receives sorted paper by shifting.
Top Offset Tray : Receives plain paper or thick paper.
Top Offset Tray Cover : Open to clear misfed paper.
Stapler Cover : Open to replace the staple cartridge.
Grip : Hold to slide the Finisher away from the machine to clear a misfeed or
perform other service job.
28
29
30
31
32
33
4002O276AA
Do not place an
object here.
NEVER place an object under the Bottom Offset
Tray. Anything that is placed under the Bottom
Offset Tray can interfere with the tray when it
lowers after a copy has been fed onto it, which
results in a malfunction.
Precautions When Using a Finisher
Downloaded From ManualsPrinter.com Manuals