Operator`s manual

2-9
3. Machine Parts and Accessories
Getting to Know Your Machine
Chapter 2
Inside the Machine
4002O111AB
1 2 3
4
5
678
9
Toner Bottle Holder : Swing open to replace the Toner Bottle. ☞ p.6-6
Toner Bottle : Contains toner. Replace it with a new one when the warning message
tells you to. ☞ p.6-6
Original Width Scale : Press your original up against this scale for correct alignment.
Original Length Scale : Press your original up against this scale for correct alignment.
Original Glass : The image of the original is scanned through this glass. Place your
original face down on this glass.
Corona Unit Cleaning
Lever
: Operate this lever to clean corona units when lines occur on printed
image. ☞ p.7-11
Dehumidifier Switch : Do not touch this switch; it is only for the Tech. Rep.
Transport Section Release
Lever [M3]
: Use to clear a misfed sheet of paper. ☞ p.6-17
Misfeed Removal Knob
[M1]
: Use to clear a misfed sheet of paper. ☞ p.6-16
1
2
3
4
5
6
7
8
9
Downloaded From ManualsPrinter.com Manuals