Operator`s manual

7-11
2. Care of the Machine
Chapter 7Miscellaneous
<Only when the Electronic Document Handler is
mounted>
Raise the Electronic Document Handler.
Wipe the surface of the Original Pad clean
with a soft cloth dampened with alcohol.
Wipe the surface of the guide plate and
polyester film (shown below) of the
Document Handler clean with a soft, dry
cloth.
NOTE
Wipe the film gently as it is fragile.
Swing down the Front Door.
Wipe the surface of the Front Door clean
with a soft, dry cloth.
Gently slide out the Upper Corona Unit
Cleaning Lever as far as it goes.
Gently slide the Cleaning Lever back into the
original position.
Gently slide out the Lower Corona Unit
Cleaning Lever as far as it goes.
Gently slide the Cleaning Lever back into the
original position.
Repeat steps 1 to 4 two to three times.
Electronic Document Handler
Front Door
1
2
4002O266AC
3
4002O267AB
Guide Plate
Polyester
film
1
2
4002O268AC
Corona Units
1
4002O192AB
2
4002O193AB
3
4002O194AB
4
4002O195AB
Downloaded From ManualsPrinter.com Manuals