Operator`s manual

1-2
Safety Notes
Chapter 1
1. Installing the Machine
Installation Site
To ensure utmost safety and prevent possible malfunctions of the machine, install it in a location which
meets the following requirements.
◆
A place away from a curtain or the like that may catch fire and burn easily.
◆
An area where there is no possibility of being splashed with water or other types of liquid.
◆
An area free from direct sunlight.
◆
A place out of the direct air stream of an air conditioner, heater, or ventilator.
◆
A well-ventilated place.
◆
A dry place.
◆
A dust-free location.
◆
An area not subject to undue vibration.
◆
A stable and level location.
◆
A place where ammonia or other organic gas is not generated.
◆
A place which does not put the operator in the direct stream of exhaust from the machine.
◆
A place which is not near any kind of heating device.
Power Source
The power source voltage requirements are as follows:
◆
Use a power source with little voltage fluctuation.
Voltage Fluctuation : Within ± 10%
Frequency Fluctuation : Within ± 0.3%
Space Requirements
To ensure easy machine operation, supply replacements, and service maintenance, adhere to the
recommended space requirements detailed below.
4002O338AA
<With EDH-3, PF-115, FN-5 and C-306L mounted>
112-1/2
82-3/4
9-1/2
20-1/4
26-1/440-1/2
16
61-1/4
46
18-1/2
48-1/4
29-3/4
Unit: Inch
40-3/4
Downloaded From ManualsPrinter.com Manuals