Operator`s manual

6-13
3. When the Message “Stapler is empty.” Appears
When a Message Appears
Chapter 6
Touch [Staple] shown on the Touch Panel
and the machine automatically feeds a sheet
of paper to test the stapling.
Remove the sheet of paper to check that it
has been properly stapled.
* If no staples are evident, clear the staple
misfed.
“Clearing the Staple Misfeed.” ☞ p. 6-42
NOTES
• Reload the Staple Cartridge only after you are
prompted to do so by the message. Removing
the Staple Cartridge before then will result in
stapling trouble.
• After a new Staple Cartridge has been installed,
be sure to run a test-stapling sequence to
ensure that staples are properly driven into the
paper.
9
4003P188CA
10
1155O736AB
Downloaded From ManualsPrinter.com Manuals