Operator`s manual

5-14
4. User’s Choice
Using the Utility Mode
Chapter 5
[2/6]
Select whether to enable (“ON”) or disable
(“OFF”) recalling a default zoom ratio for 2in1,
4in1, or Booklet Creation. Setting is possible for
“2in1/4in1” and “Booklet Creation.”
• “2in1/4in1”
Default zoom ratios:
2in1: 0.647
4in1: 0.500
The initial setting is “ON.”
• “Booklet Creation”
Default zoom ratios:
Booklet Creation: 0.647
The initial setting is “ON.”
Select the default density setting selected
automatically in the initial mode. Select either
“Auto” or “Manual” for the exposure mode and
“Text,” “Text/Photo,” or “Photo” for the image
quality setting.
The initial settings are “Auto” for the exposure
mode and “Text” for the image quality setting.
* “Auto” cannot be combined with “Text/
Photo” or “Photo.”
Auto
Select the default exposure level in the Auto
Exposure mode, either “Lighter,” “Normal,” or
“Darker.”
The initial setting is “Normal.”
Manual
Set the default exposure level in the Manual
Exposure mode.
The initial setting is “5.”
* With EXP5 at the central level, the exposure
level will become lower as the number
becomes smaller, and it will become higher as
the number becomes greater.
Select the default combination of the finishing
type when the machine is equipped with a Finisher
from among the followings:
<For United States and Canada Users>
Non-Sort, Sort, or Group
Hole Punch (only when FN-503/FN-5 is mounted)
2-Hole Punch (only when FN-105 is mounted)
3-Hole Punch (only when FN-105 is mounted)
Corner Staple
2-Point Staple (only when FN-105/FN-5 is
mounted)
<Except United States and Canada Users>
Non-Sort, Sort, or Group
Hole Punch (only when FN-105/FN-503/FN-5 is
mounted)
Corner Staple
2-Point Staple (only when FN-105/FN-5 is
mounted)
The initial setting is “Non-Sort.”
Select whether to turn “ON” or “OFF” the
function that automatically switches between Sort
and Non-Sort. It selects Non-Sort if only a single
original is loaded and Sort if two or more originals
are loaded in the Electronic Document Handler.
The initial setting is “ON.”
Select whether to enable (“ON”) or disable
(“OFF”) crisscross sorting when the conditions for
crisscross sorting are met and Sort or Group is
selected.
The initial setting is “ON.”
2in1, 4in1, Booklet Copy Zoom
Density Priority
Default Level
4003P167CA
Output Priority
Intelligent Sorting
Criss Cross Mode
Downloaded From ManualsPrinter.com Manuals