Operator`s manual

5-11
Using the Utility Mode
Chapter 5
3. Meter Count and Toner Replenisher
Meter Count
Touching [Meter Count] allows you to check the total count of each of the following seven counters
recorded since the installation of the machine.
Shows the total number of prints made since the
installation of the machine.
Shows the number of prints made on paper of a
preset size. (The size will be set by your Technical
Representative.)
Shows the number of 2-sided prints made.
Shows the number of 2-sided prints made on paper
ofapresetsize(thesamesizeasthatsetforthe
Size Counter.)
Shows the total number of prints made by the
active accounts.
Shows the number of prints produced by the
machine configured as a printer.
Shows the number of prints produced by the
machine configured as a printer on paper of a size
preset for Size Counter.
(This counter counts the number of prints made on
paper of the same size as that set for the Size
Counter.)
Toner Replenisher
Touching [Toner Replenisher] sets the machine into the auxiliary toner replenishing mode.
The machine tends to exhaust the supply of toner rapidly when printing a large number of pages using an
original with dark solid areas such as a photo. As a result, the printed image density will become lighter.
In such a case, you can use Toner Replenisher to regain the normal image density quickly.
NOTES
• Do not turn OFF the Power Switch or open the Front Door while the machine is replenishing toner.
• Toner is not replenished if the image density is sufficiently high.
• The toner replenishing sequence ends automatically.
Total Counter
Size Counter
2-Sided Total Counter
2-Sided Size Counter
Account Total Counter
Printer Total Counter
Printer Size Counter
Downloaded From ManualsPrinter.com Manuals