Operator`s manual

5-8
2. Image Memory Input
Using the Utility Mode
Chapter 5
Select the desired erase position.
Using [▼]or[▲], set the desired erase
width.
Useful Tip
The erase width can range between 1/4 to 3/4
variable in 1/16 increments.
Touch [Enter].
Touch [Enter].
As illustrated on the Touch Panel, place the
original directly on the Original Glass.
Select an image orientation the same as that
of the original.
Press the Start key.
7
4003P459EB
8
4003P460EB
9
10
4003P461EB
11
4002O152AC
12
4003P162CB
13
Downloaded From ManualsPrinter.com Manuals