Operator`s manual

5-7
2. Image Memory Input
Using the Utility Mode
Chapter 5
<Auto size detection>
• Touch [AutoDetect] on the screen given in step
5.
<Size input>
• Touch [Custom Size] on the screen given in step
5.
• Touch [▼]or[▲] to set the whole number for X
and touch [X]. The underline moves to the right.
Then touch [▼]or[▲] to set the fractional
number and touch [X]. Now the value for X has
been fixed.
• Do the same for Y, then touch [Enter].
If you want to erase the image on the left,
top, or along the frame of the original, touch
[Erase].
You have a choice of the following three
types of erase:
4003P455EB
4003P456EB
4003P457EB
6
4003P458EB
1149O053AA
Left Edge Erase
Stores the image after erasing the left edge of
the original.
Orig.
Input Image
1149O056AA
Top Edge Erase
Stores the image after erasing the top edge of
the original.
Orig.
1149O055AA
Frame Erase
Stores the image after erasing the four edges
of the original.
Orig. Input Image
Input Image
Downloaded From ManualsPrinter.com Manuals