Service manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-19
Tech. Rep. Mode Tech. Rep. Choice
<Printer>
Touch Panel
Display
Setting (The default is ).
Dry Key Set Select whether to display the Dry key for “User Management” of Utility.
If the key is to be displayed, select whether to dry only the Scanner or
both Scanner and Drum.
Function Limit Select whether to limit (“ON”) the functions to be set on the control
panel or not (“OFF”).
Special Image
Quality
Select whether to enable the selection of Special Image Quality for
“Density Priority” of User’s Choice (applicable on a case-by-case
basis).
✽
Touching the “
✽
” key on the System Set menu selects or cancels
this function.
Touch Panel
Display
Setting (The default is ).
Edge Erase Set the erase width on the leading, trailing, right, and left edge of the
image.
Loop Adjustment
Set the loop length to be formed before the Synchronizing Rollers.
Highlighted
Scanner Scanner & Drum
Disable
ON
Enables the functions other than Orig.
Copy and Auxiliary.
Enables all functions (no Limit).
OFF
✽
Key high-
lighted
The Special Image Quality key is displayed.
✽
Key not high-
lighted
The Special Image Quality key is not dis-
played.
Highlighted
Leading
0mm......................... ...................... 5mm
Trailing
Smaller Greater
Right/Left
4
1st Drawer
-5mm........................ .................... +5mm
Other Drawers
Smaller Greater
Duplex & Manual
0