Service manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-16
This mode is used by the Tech. Rep. to set, check, adjust, and/or program various ser-
vice functions.
<Setting Procedure>
1. Set the copier into the Tech. Rep. mode by the following method:
With the “Meter Count” screen opened from the Utility menu screen, press the following
keys in this order:
2. Select the particular Tech. Rep. mode function to be set.
3. Make the necessary settings according to the function selected.
The function selected is highlighted.
<Exiting the Mode>
Touch [Exit] on the screen to go back to the Basic screen.
5 TECH. REP. MODE
5-1. Tech. Rep. Mode Menu Screen
5-2. Tech. Rep. Mode Function Setting Procedure
Stop Key
0
0
Stop Key
0
1
1171S005CA