Service manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-13
3/5
Touch Panel
Display
Setting (The default is ).
Auto Panel Reset Specify the default exposure mode selected automatically when
power is turned ON or the Panel Reset key pressed.
Energy Save Mode Set the time it takes the copier to enter the Energy Saver mode after a
copy cycle has been completed or the last key operated. Use the 10-
key Pad to set the time (15 to 240 min.).
Plug-In Counter,
ID key Reset
Select whether to reset (“ON”) the panel or not (“OFF”) automatically
when the Access Mode key is pressed or the Key Counter is
unplugged.
Auto Shut Off Select whether to turn ON or OFF the Auto Shut Off function that
shuts down the copier a given period of time after a copy cycle has
been completed or the last key operated. Selecting “ON” means set-
ting the time it takes the Auto Shut Off function to be activated, that
can range from 15 min. to 240 min.
✽
The option of “No Reset” becomes available on the screen if “Yes”
is selected for “Disable Sleep” of Utility - Admin. Management -
Administrator Set.
LCD Back-light Off Set the time it takes the LCD backlight to turn OFF after a copy cycle
has been completed or the last key has been operated.
Highlighted
30 seconds 2 min
3 min 5 min No Reset
1 min
(15 to 240)
(15 min)
OFF
ON
No Reset
(15 to 240)
(60 min)
(1 to 240)
(1 min)