Service manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-12
2/5
Touch Panel
Display
Setting (The default is ).
Original Copy
Default
Select the type of Original Copy setting selected automatically
when the copier is turned ON or Panel Reset key pressed. If “Duplex
only” is selected for “Simplex/Duplex” of the “Tech. Rep. Choice” func-
tion, 1 1 is not displayed.
Auto Paper/
Auto Size
Specify the default mode selected automatically when power is turned
ON or the Panel Reset key pressed.
Tray Priority Specify the paper source selected automatically.
✽
Manual Bypass Tray is not selectable.
Special Paper Set up a drawer for special paper loading.
2 • 4 in 1, Booklet
Copy Zoom
Select whether to enable (“ON”) or disable (“OFF”) recalling a default
zoom ratio for 2in1, 4in1, or Booklet Creation.
The default zoom ratios are as follows when “ON” has been selected.
Highlighted
<1-Sided 2-Sided>
<1-Sided 2-Sided>
1-Sided
2-Sided
2-Sided
2-Sided
2-Sided
2-Sided
1-Sided
1-Sided
1-Sided
2-Sided
Auto Size Manual
Auto Paper
2nd Drawer
3rd Drawer
4th Drawer
5th Drawer
LCT
1st Drawer
Not for 2-Sided
Recycled Special
Normal
OFF
ON
< Metric Areas >
× 0.500 4in1
× 0.707 2in1/Booklet
× 1.414 Separation
< Inch Areas >
× 0.500 4in1
× 0.647 2in1/Booklet
× 1.545 Separation