Service manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-2
✽
For more details, see the Operator’s Manual shipped with the copier.
2 CONTROL PANEL KEYS AND TOUCH PANEL
2-1.
Control Panel Keys
1. Touch Panel
•
Shows various screens and messages.
2. Utility Key
•
Press to show the User Mode menu.
3. Mode Check Key
•
Shows the Mode Check screen on which
the user can check the current copying
settings.
4. Access Mode Key
•
Used to enter the access number. After
the access number has been entered,
pressing this key will allow the user to
make copies.
5. Interrupt Key
•
Sets the copier into, or lets it leave, the
Interrupt mode.
6. Display Contrast Knob
•
Turn to vary the brightness of the Touch
Panel.
7. Panel Reset Key
•
Clears all settings made on the control
panel, setting the copier back into the ini-
tial mode.
•
Cancels currently reserved jobs.
✽
It does not clear the zoom ratios and job
settings stored in memory and Interrupt
mode.
8. Clear Key
•
Clears the number-of-copies setting,
zoom ratio, and counter count.
•
Cancels the image data read.
9. Stop Key
•
Press to stop a scanning cycle.
•
Press to stop a print cycle.
10. Start Key
•
Press to start the document scanning
sequence.
•
Press to start a print cycle.
11. 10-key Pad
•
Numeric key pad used for entering the
number of copies to be made, zoom ratio,
access number, and the Tech. Rep. mode
settings.
1166O238EB
321
4
5
6
7891011