Service manual

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-32
NOTE
Make this adjustment after either of the following procedures have been performed:
• Memory Clear
• Control Panel replacement
Adjustment Procedure
1. Call the Initial mode to the screen. (For details, see SWITCHES ON PWBs, TECH.
REP. SETTINGS.)
2. Touch [Touch Panel Adj.].
3. Touch + on screen 1.
NOTE
At this time, ensure that the very center of “+
”
is touched using the tip of a ballpoint pen or
similar device.
4. Touch + on screen 2.
5. Touch + on screen 3.
6. Touch + on screen 4.
3-5. ELECTRICAL/IMAGE ADJUSTMENT
(1) Touch Panel Adj.
“Initial” Screen
1171D057CA
1171D058CA1171D059CA
4
12
3
1171D056CA