Service manual

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-19
(10) Winding of the Scanner Drive Cables
1167D047AB
Pulley H
Pulley F
Pulley E
Pulley G
Pulley B
Pulley A
Pulley C
Pulley D
1. Position the round bead of the Scanner Drive
Cable in the pulley as shown.
Front
1167D051AC
2. Wind the hook end of the Scanner Drive Cable two
turns counterclockwise from the rear side to the
front.
1167D052AD
Cable on Hook End
3. Wind the bead end of the cable four turns clock-
wise from the front to the rear. Then, secure the
cable with tape.
NOTE
Make sure that no part of the cable rides on the other.
1167D053AD
Cable on
Bead End