Service manual

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-18
1. Remove the Original Glass and ADF Glass Assy.
2. Remove the Left IR Cover.
3. Remove the Scanner.
8. Remove the Scanner Drive Cable, hook end first.
(9) Removal of the Scanner Drive Cables
4. Unhook the spring of the cable on the hook side,
one each at the front and in the rear.
1167D044AB
5. Remove one screw and the Original Size Detection
Sensor.
✽
Inch Areas Option.
1167D070AA
6. Snap off one E-ring and remove one mounting
screw from the front pulley and slide the pulley to
the rear.
1167D071AA
7. Snap off one E-ring and remove one mounting
screw from the rear pulley and slide the pulley to
the front.
1167D072AA