Service manual

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-13
NOTES
• Do not place the PH Unit upside down or subject it to excessive shock.
• Replace the PH Unit as one unit.
• NEVER attempt to disassemble or adjust the PH Unit.
• Whenever the PH Unit has been removed, make the following adjustments:
Edge Erase, Registration (CD, FD) (Printer), Registration (IR).
(2) Removal of the PH Unit
8. Remove one screw and the Total Counter Mount-
ing Bracket Assy.
9. Unplug one connector of the Control Panel.
10. Remove two screws that secure the front end of
the frame.
1167D033AC
11. Remove five screws that secure the rear end of the
frame.
1167D059AC
12. Raise the rear end of the IR Unit and pull the unit
out toward front.
1171D053AA
1. Remove the Upper Cover, Front Cover, Left Cover,
and Rear Cover.
2. Remove four screws and the MFB Box Cover.
3. Unplug five connectors of the MFB Board.
1167D058AE