Service manual

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-12
1. Remove the Original Cover, Front Holding Bracket, Upper Front Left Cover, Front Cover,
Front Upper Cover, Rear Right IR Cover, Rear Left IR Cover, Rear Lower Cover, Rear
Upper Cover, and Front Inside Cover.
2-4. OPTICAL SECTION
(1) Removal of the IR Unit
2. Remove one screw and the Motor Cover.
1171D054AA
3. Remove the Shielding Plate. (U.S.A. and Canada
only)
4. Remove one screw and the Harness Cover.
1167D149DA
5. Unplug eight connectors of the HGB Board.
1167D027AC
6. Remove three screws and the Harness Cover.
7. Unplug one connector of the BCR Board.
1167D032AC