Service manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS

98.11.25

S-42

•

Initial mode is used to initialize the various service functions.

1. Enter the Initial mode by pressing the following keys in this order:

2. Select the particular Initial mode function to be set.

3. Make the necessary settings by following the instructions given sequentially on the

screen.

✽

The function selected is highlighted.

•

Touch [Exit] on the Initial mode screen to go back to the Basic screen.

8 INITIAL MODE

8-1. Initial Mode Menu Screen

8-2. Initial Mode Function Setting Procedure

Warm Restart

Switch ON

➡

Enter “3” from the 10-Key Pad when “.” appears at the center on the

left side of the screen while the start-up screen is being displayed.

1167S013CB