Service manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-40
•
This function is used to enter the adjustment values as they relate to the printer.
<Setting Procedure>
1. Touch [Printer] to open the Printer screen.
2. Select the desired subfunction.
Tech. Rep. Mode Adjust
7-3. Adjust Mode Function Tree
7-4. Settings in the Adjust Mode
(1) Printer
Touch Panel
Display
Setting (The default is ).
Registration (CD) Adjust registration of the printer in the main scanning direction.
✽
Adjust “Duplex” after adjustments have been completed for all
drawers.
Registration (FD) Adjust registration of the printer in the sub-scanning direction.
Adjust
Printer
IR
Registration (CD)
Registration (FD)
Registration
Zoom Adjust
Highlighted
1st Drawer
-4.0mm...................... .....................+4.0mm
2nd Drawer
3rd Drawer
4th Drawer
Advanced timing Retarded timing5th Drawer
Duplex
0
-19.......................................... .........................................+19
Advanced timing
Retarded timing
0