Service manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-36
Tech. Rep. Mode Security Mode
6-3. Settings in the Security Mode
Touch Panel
Display
Setting (The default is ).
Total Counter Select the conditions by which the Total Counter count is increased.
✽
See the Count-up Table for details.
Size Counter Select the size of the paper to be counted by the Size Counter.
✽
See the Count-up Table for details.
Copy Kit
•
Allows for setting the desired threshold before the Maintenance Call
reminder is given.
•
Displays both the current value and the above setting value. Each
counter can also be reset independently of the other.
•
When the current value (Current) becomes the setting value (Set),
the icon “ ” appears in the Status Display if “Mode 2” is selected
for “Copy Kit Counter” and the Maintenance Call reminder (M4) is
displayed if “Mode 3” is selected for “Copy Kit Counter.”
✽
Whether the initiation of a new copy cycle is inhibited or not when
the current value exceeds the setting value depends on the setting
made with Copy Kit Counter.
<Counter Setting Procedure>
1. Touch [Set] and press the Clear key to clear the current setting. If
the setting is accidentally cleared, pressing of the Interrupt key will
undo the clear operation.
2. Enter the desired value from the 10-Key Pad.
<Clearing the Count>
Touch [Current] and press the Clear key to clear the count. If the
count is accidentally cleared, pressing of the Interrupt key will undo
the clear operation.
Highlighted
1 count per 1 copy cycle (normal mode)
Mode 2
Multiple count-up according to paper size and
1/2-sided copying
Mode 3
Multiple count-up according to paper size and
1/2-sided copying
Mode 1
No Count
A3 / B4
11×17
Legal
A3 /11×17
B4 /11×14
FLS/Legal
A6
A3
11×17
Display Description
Set Gives a Maintenance Call when Current
value reaches Set value.
Current Counts up for each copy made.